Medical Isolated Power Supply Hospital Remote Alarm Indicator for Nursing Station

• Customization: Available
• Power Supply: DC24V
• Monitored System Voltage: AC 242V
• Model NO.: AID150
• Rated Frequency: 45-60Hz
• Locating Voltage: Under 25V
• Locating Current: Under 1mA
• Locating Circuits: 8 Circuits,Max up to 24 Circuits
• Communication: Can
• Transport Package: Paper Carton
• Specification: 0.5kgs
• Trademark: ACREL
• Origin: Jiangsu, China
• HS Code: 9031809090
• Production Capacity: 1000PCS/Week

Product Description

Product Description

Medical isolated power supply hospital IPS unit remote alarm indicator 

AID150 centralized remote alarm indicator  is with lcd display and achieves data exchange with AIM-M200 medical insulation monitor device

by RS485 communication, it can real-time monitor data of multi channel AIM-M200 medical insulation monitoring devices.

 

The alarm and display instrument AID150 is designed for visual and audible indication of alarm messages from ACREL medical

insulation monitor AIM-M10, AIM-M100, AlM-M200, and residual current monitor AIM-R100.

It meets with the requirement of IEC 60364.

Functions and Parameters

1. Visual alarm,1 LED (green) for indicating the operating status , 1 LED(green)for communication, 1 LED (yellow) for error, and 1 LES (red)for alarms.

2. Audible alarm (can be muted by pressing mute button).

3. AIM-M series IMD can be tested by pressing the test button of AID150.

4. Communicate with the maximum of 16 AIM-M or AIM-R series devices via RS485 bus with Modbus-RTU protocol.

5. Display the operating status with LCD.

 

 

Technical data of AID150 centralized remote alarm indicator
aux. power	Voltage	DC 24V
	Power consumption	≤0.6W
Insulation Resistance Display Range		0-999kΩ
Insulation alarm range		50-999kΩ
Transformer Output Current Display		Percentage
Current alarm range		14A,18A,22A,28A,35A,45A
Temperature alarm range		0 -200ºC
Alarm mode		visual and audible indication alarm
Alarm type		Insulation fault, overload, and over temperature
Communication		RS485,MODBUS-RTU
Display mode		LCD,128*64 dot array

Remark:the medical fault locator can locate up to 24 circuits in the same hospital power system

Dimensions and Wirings



Solutions and Applications

name	model
Insulation monitor	AIM-M200
Power module	DR-60-24
Isolation transformer	AITR8000
Current Transformer	AKH-0.66P26
test signal generator	ASG150
insulation fault locator	AIL150-4
centralized remote alarm indicator	AID150

instructions:For the method of the isolation power supply system in the operating room and the intensive care room, please refer to Acrel isolation power supply monitoring system design and application Atlas" and product selection manual.

About ACREL