Acrel Adl3000-E/CT DIN Rail Three Phase Channels Multifunction Electrical Properties Power Energy Meter for Solis and Goodwe Solar Inverter

• Customization: Available
• Application: Position Sensor
• Type: Current Transformer
• Model NO.: ADL3000-E/CT
• Phase: Single
• Operation Condition: Indoor
• Usage: Measurement
• Winding Form: Single Layer & Tightly Wound Type
• Insulating Medium: Epoxy Resin
• Installation: DIN Rail
• Magnetic Circuit Structure: Combined Type
• Voltage Transformation Principle: Photoelectric Type
• Specifications: 3 Phase 3 Wires/ 3 Phase 4
• Reference Voltag: 3*100V/ 3*380V/3*57.7/100V/ 3*220/380V
• Voltage Consumption: <10va(Single Phase)
• Voltage Impedance: >2m
• Accuracy Class: Error About 0.2%
• Input Current: 3*1(6)a/3*1(6)a(Outlay Transformer)/3*10(80)a/3* 1
• Current Consumption: <1va(Single Phase Rated Current)
• Power: Activereactive/Apparent Power
• Frequency: 45 to 65Hz
• Switching Output: 1 Switching Output, Maximum Allowed Voltage: DC/AC
• Switching Input: 1 Optocoupler Input,Maximum Allowed Voltage: DC/AC
• Interface and Communication: RS485/Modbus
• Range of Communication Address: Modbus RTU 1~ 247
• Transport Package: Carton
• Specification: 60*78*36mm
• Trademark: Acrel
• Origin: Jiangsu, China
• HS Code: 7201100000
• Production Capacity: 5000

Product Description

 

Product Description

ADL3000-E is a smart meter designed for power supply system, industrial and mining enterprises and utilities to calculate the electricity consumption and manage the electric demand. It features the high precision, small size and simple installation. It integrates the measurement of all electrical parameters with the comprehensive electricity metering and management provides

various data on previous 12 months, checks the 31st harmonic content and the total harmonic content, realizes the remote communication and the remote control with switching input and relay output and boasts the alarm output. It is fitted with RS485 communication port and adapted to MODBUS-RTU. ADL3000-E can be used in all kinds of control systems, SCADA systems and energy management systems. All meters meet the related technical requirements of electricity power meter in the IEC62053-21,IEC62053-22 standards.

Detailed Photos

Voltage	Reference voltage			3*57.7/100V,3*220/380V,3*100V,3*380V
	Reference frequency			50Hz
	Consumption			<10VA(Single phase)
Current	Maximum current			6A,80A
	Starting current			Direct connect:0.004lb Connect via:0.001ln
		Consumption			<1VA(Single phase rated current)
Measurement performance		Accuracy			Class 0.5
		Standards compliant			IEC 62053-22:2003
Pulse			Pulse width		80+20ms
	Pulse constant			400imp/kWh 6400imp/kWh
Communication	Interface			RS485
	Protocol			Mod bus-RTU
Temperature range	Work			-25ºC~55ºC
	Storage			-40ºC~70ºC
Humidity				≤95%(No condensation)
Altitude				<2000m

 

FAQ

Q:I bought a three-phase four-wire meter, can it be wired as three-phase three-wire?
A:Yes, press the key to set the meter to three-phase three-wire mode.
 
Q:What is the difference between ordinary secondary access and -CT (model external transformer)?
A:Ordinary secondary meter could access the ratio XXX/5(1)A of the CTs which could be actual current on site, the -CT model comes with an external transformer will be convenient for installation(It cannot be disassembled, otherwise it will burn the meter). There are CTs available on site to facilitate with No stitch removal.
 
Q:What are 3*100V,3*57.7/100V,3*380V,3*220/380V?
A:3*100V, 3*57.7/100V are used for high voltage, used in conjunction with voltage transformers, where 3*100V represents 3P3W,3*57.7V/100V represents 3P4W; 3*380V, 3*220V/380V are used for low voltage, direct voltage input, among them3*380V represents 3P3W, 3*220V/380V represents 3P4W.
 
Q:Can this meter communicate with PLC?
A:Yes, only need PLC to support RS485 interface, Modbus RTU or DL/T645 protocol.
 

Certifications

 

Packaging & Shipping

 

Company Profile