| After-sales Service: | 2 Years |
|---|---|
| Warranty: | 2 Years |
| Display: | Digital |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier DTSD1352-4S series DIN-rail type multi-circuit power meter is mainly used for the full electric parametermeasurement of multiple circuits, and can be connected to the current input of 4 three-phase circuits or 12single-phase circuits at the same time. It can measure parameters such as voltage and current, power, power factor,phase angle, unbalance, and harmonics
| Voltagespecification | Instrument model | Current specification | Matching current transformer | note |
| 3x220/380V | DTSD1352-xSyD | 3×250A | AKH-0.66/W-20Y Class 0.2 | For three-phase |
| 3×100A | AKH-0.66/Z-15Y Class 0.2 | |||
| 1×100A | AKH-0.66/W-12Y Class 0.2 |
| Auxiliary Power Supply | AC/DC 85~265V; Power Consumption≤10VA | |||
| Input Single | Frequency | 45~65Hz | ||
| Voltage | Rated value: AC 3×220V/380V | |||
| Overload:1.2 times rated value(continuous) | ||||
| 2 times rated value/1 second | ||||
| Power consumption:≤ 0.5VA(per channel) | ||||
| Input signal | Current | Rated value:AC 250A,100A;(external closed port transformer) | ||
| Overload:1.2 times rated value(continuous) | ||||
| 10times rated value/1 second | ||||
| Power consumption ≤ 0.5VA(per channel) | ||||
| Measurement accuracy | Frequency 0.05Hz,voltage and current class 0.5, active energy class 1,.reactive energy class 2 |
|||
| 2-31st harmonic accuracy:±1% | ||||
| Function | Pulse output | Output mode: optocoupler pulse with the open collector(one out of two with active input) | ||
| Function | Communication | RS485 interface, Modbus-RTU protocol/QZTT 1017-2015 | ||
| technical specification for China Tower smart meter | ||||
| Baud rate 1200~38400 | ||||
| Switch-value | Input | 4-channels passive dry contact input, built-in power supply | ||
| 2-channels active wet node input, identify engine oil and power connection(or pulse output) | ||||
| output | Output mode: relay normally open contact output | |||
| Contact rating: AC 250V/3A DC 30V/3A | ||||
| Security | Power frequency withstands voltage | >AC 2kV/1min | ||
| Insulation resistance | Input and output end to housing | |||
| Environment | Working temperature:-20ºC~+60 C | |||
| Storage temperature:-40ºC~+70ºC | ||||
| Relative humidity≤95% no condensation | ||||
| Altitude≤2500m | ||||
| Electromagnetic compatibility | Better than level 3 | |||
| Function | Description |
| Measurement of energy | All electrical parameters of x-channel three-phase andy-channel single-phase circuits are measured |
| Electrical parameters | U,1,F,P,Q,S,PF |
| Harmonic | 2-31st voltage and current harmonic |
| Extreme value record | U, I, P |
| Alarm output | Overvoltage, Over current, Phase break, DI linkage |
| Rate setting | 4 rate time zone 14 |
| Pulse output | Output mode: optocoupler pulse with open-collector(one out of two with active input) |
| communication | RS485 interface, Modbus-RTU, Baud rate 1200~38400 |
| DI | 4-channels passive dry contact input, built-in power supply2-channels active wet node input, identify engine oil and power connection(or pulse output) |
| DO | Output mode: relay normally open contact output Contact rating: AC 250V/3A DC 30V/3A; |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}