ACR10r-Dte Single Phase Energy Meter with Split Core Current Transformer

• Display: Digital
• Installation: Indirect Connected
• Usage: Multi-Functional Energy Meter, Watt-Hour Meter, Meter for Industry and Home Use, Standard Electric Energy Meter, Reactive Energy Meter, Multi-rate Watt-hour Meters, Maximum Demand Meter
• Electric Equipment: Three-phase Four-wire
• Theory: Electronic Meter
• Power Meter Connection: Terminal
• Model NO.: ACR10R-D16TE
• Measured Signal: Pulse Peak
• Type: Energy Meter
• Certification: CE
• Customized: Customized
• Rated Voltage: 220V
• Rated Current: 120A
• Screen: LCD
• Refresh Rate: 250ms or 200ms
• Accuracy: 1
• Frequency: 45-65Hz
• Certificate: CE
• Warranty: 2 Years
• Transport Package: Paper Carton
• Specification: 126*88*70mm
• Trademark: ACREL
• Origin: Jiangsu, China
• HS Code: 9028301400
• Production Capacity: 1000PCS/Week

Product Description

Product Description

ACR10R single phase energy power meter with current transformer for solar storage system

single pahse din rail energy meter with split core open ct clamps is suitable for power monitoring of grid-connected PV power

station,power demand side management and other applications.

 

It is easy to install without removing primary bus bar and cost-effective.

 

It can measure electrical parameters including current,voltage, active power,reactive power,apparent power,frequency,power factor

and so on.

 

It supports multi-tariff energy metering,4 quadrant energy metering,harmonic analyse and energy monitoring.

 

Circuit breaker switch 'remote signaling' and 'remote controlling' can be realized with digital input and relay output.

Functions and parameters

Functions and parameters of ACR10R-D16TE
 

*Bidirectional energy meter
*Input:220V 120A current

*Refresh rate:250ms or 200ms
*Communication:RS485 modbus-RTU

*Switching value input and relay output
*Optional functions:

refering to below Data sheet

ACR10R-D16TE single phase energy meter with CTs clamps 16mm
Network		3 phase 4 wire LCD display
voltage	measuring range	AC 220V
	power consumption	≤0.2VA
current	measuring range	120A
	power consumption	≤0.2VA
frequency		45hz-65hz
Meauring parameters	Current,voltage,frequeny and power factor
	active power,reactive power and apparent power
	four quadrant energy
Optional functions	Total harmonic distortion(THD)
	Up to the 31st harmonic
	Max demand
	Multi-tariff energy metering
	SOE record
	Alarm
	in-built clock
	J(2DO)	J,K,2 channel pulse,4DI+2DO or 4DI+EP
	K(4DI)
	Pulse(2 channel)
Accuracy	Frequency:0.05hz ,reactive energy:1 current,voltage:0.5
Power supply	AC85-265V or DC100-350V;DC24V(±10%);DC48V(±10%) power consumption≤10VA
switching value input	4 circuit dry contact
relay output	2 NO contact,capacity:AC 250V/3A,DC 30V/3A
environment	working temperature	-10ºC-55ºC
	storage temperature	-20ºC-70ºC
	relative humudity temperature	≤93%(non-condensing)
	altitude	≤2500m
Communication		RS485,Modbus-RTU

Dimensions and Wirings

It is recommended to use 0.5A or 3A for the fuse in the connection diagram;

RS485 communication terminal connection can use either RJ45 female or normal connector

Applications and Solutions


Reverse power alarm ,zero export meter device

Certifications



About ACREL

Professional manufacturer with over 18 years experience in energy meters

FAQ

Q:Where is your company located?
 
A:Our headquarter is in Shanghai, our factory locates in Jiangyin,Jiangsu Province,China.It takes about 1 hour by car from Shanghai Hongqiao International Airport to our factory. As it is low labor cost here in Jiangsu,we can offer a better price with high quality.

 
A:Our headquarter is in Shanghai, our factory locates in Jiangyin,Jiangsu Province,China.It takes about 1 hour by car from Shanghai Hongqiao International Airport to our factory. As it is low labor cost here in Jiangsu,we can offer a better price with high quality.
 
Q:What's your lead time?
 
A:Sample time 1-3days,mass production 10~20days for order more than 500pcs
 
Q:Payment terms?
 
A:Usually,TT,credit card,western union,in cash and so on.You can also choose to pay 30% as deposit and the balance before shipment or against copy of B/L if the order is large.
 
Q:Can other logo be put on your products(ODM)?

A:Yes,but MOQ for ODEM will be at least 100pcs.We also need you provide logo Ai Format or EPS.