Acrel Adl200n-CT/D16 Programmable 3-Phase Multi-Functional Energy Meter for New Energy Power Generation Systems

Product Description

 

ADL200N Programmable DIN Rail Three-Phase Multi-Functional Energy Meter with RS485 LCD Display for New Energy Power Generation Systems

Product Description

 

ADL series DIN-rail mounted multi functional electric energy meter is an intelligent instrument mainly designed for new energy power generation systems such as photovoltaic grid-connected system, micro inverter system, energy storage system, AC coupling system, etc. The product has the advantages of high precision, small volume, high respondent speed and convenient installation. The product has the features of sampling, metering and monitoring power parameters,communicating with an inverter or an energy management system (EMS), realizing the functions of preventing reverse flow, regulating power generation, charging and discharging batteries according to real-time power and accumulated electric energy, and realizing bidirectional metering and household distributed photovoltaic energy management.

Function

Function	Descriptions	ADL200N-CT	ADL400N-CT
Electric energy metering	Active energy metering (forward and reverse)	Y	Y
	Reactive energy metering (forward and reverse)	Y	Y
	Split-phase energy	N	Y
Electric quantity measurement	U, I	Y	Y
	P, Q, S, PF, F	Y	Y
LCD display	Segmented LCD display	Y	Y
Key programming	ommunication, transformation ratio and other parameters can be programmable by the key	N	Y
Pulse output	Active pulse output	Y	Y
LED alarm	Operation instructions	N	Y
Communication	RS485:Modbus RTU	Y	Y

 

 

Product Parameters

Item			Performance Parameters
Model Series			ADL200N-CT	ADL400N-CT
Measurement	Grid		Single-phase	Three-phase four-wire, three-phase three-wire, single-phase three-wire
	Voltage	Rated voltage	230V	3×220/380V,3×230/400V,3×277/480V
		Input Range	±20%
		Overload	1.2 times rating (continuous) ,2 times the rating for 1 second
		Power consumption	<0.2VA
		Accuracy class	Error ±0.5%
	Current	Input current	80A, 120A, 200A, 300A	3×80A, 3×120A, 3×200A, 3×300A
		Overload	1.2 times rating (continuous) ,2 times the rating for 1 second
		Power consumption	<0.2VA
		Accuracy class	Error ±0.5%
	Power		Active, reactive, apparent power, error ±0.5℅
	Grid frequency		45~65Hz, error ±0.5%
	Response rate		≤100ms (voltage, current, power)
			≤1s (electrical energy)
Metering	Electric energy		Active energy :Class B (split current transformer)Reactive energy (Class 2 accuracy)
electromagnetic compatibility	Electrostatic discharge immunity class III
	Electrical fast transient burst immunity class IV
	Surge (shock) immunity Class IV
Security	Power frequency withstand voltage		Between communication and signal input, AC4kV 1min
	Insulation resistance		Input and output terminals to casing >100MΩ
Communication	Interface and communication protocol		RS485 interface and Modbus RTU protocol
	Communication address range		Modbus RTU:1~ 247
	Baud rate		Support 1200bps-38400bps
Environment	Operating temperature		40ºC~+70ºC
	Storage temperature		40ºC~+70ºC
	Relative humidity		≤95℅ (without condensation)
	Altitude		≤3000m

Supporting transformer specifications

Ordering specifications	Current transformer parameters	Number of transformers
ADL400N-CT/D10	80A/26.6mA	3
ADL400N-CT/D16	120A/40mA	3
ADL400N-CT/D24	200A/66.6mA	3
ADL400N-CT/D36	300A/100mA	3

 

Appearance

LCD Display

Wiring

Schematic Diagram of Voltage and Current Connection

Installation Instructions

Networking

FAQ

Q: What's the difference of current input via direct connect or via CTs?

A: Normally, for 3-phase loads with rated current below 80A AC, we will use model of ADL400 whose current input is via direct connect. Specs of "Rated Current: 10(80)A AC" was aimed for this model of ADL400 (current input via direct connect). 10 means basic current is 10A AC, 80 means rated current input is 80A AC.

And for 3-phase loads with rated current over 80A AC, we will use model of ADL200 whose current input is via CTs (usually paired with -/5A CTs whose secondary current output is with 5A AC rated current output). Specs of "Rated Current: 1(6)A AC" was aimed for this model of ADL200 (current input via CTs). 1 means basic current is 1A AC, 6 means max current input is 6A AC.

 

Q: Do your company also have paired CTs for ADL200?

A: Usually, we will recommend our user to use split-core CTs called AKH-0.66/K K-φ Series or solid-core CTs called AKH-0.66/I Series to the paired with ADL200 (current input via CTs)

 

Q: How can I set the CT or PT ratio of ADL200?

A: Current ratio of ADL200 could be set by using the keypads on ADL200 and following the instruction of ADL200 manual. Also, setting need to be according to the CTs or PTs ratio which were paired with ADL200. For example, if the current input is via 250A/5A CTs, the CT ratio on ADL200 should be set to 250/5=50. And if the voltage input is via direct connect, PT ratio on ADL200 should be set to 1. When the problem hasn't been solved, please contact us for help.

 

Q: Could ADL400 be used in IoT Energy Monitoring System for factory or building?

A: ADL400 has standard RS485 interface and MODBUS-RTU communication protocol which allow it to be integrate with our IoT Energy Monitor Solution that can enable our users to remotely check all the data collect by energy meters like ADL400 on their mobile phone or PC. For more information, please Contact us or check in IoT Energy Monitoring Solution Introduction.

 

Q: What is Multi-rate/tariff function? How does it work?

A: First,multi-rate/tariff function was designed to be used for billing system. Second, the electricity price of different time duration in a day is different in some country.

Energy meter with this function can measure the kwh data and assign them to several time duration in a day and put a label of spike/peak/flat/valley kwh on them respectively. And if such energy meter was connected to the billing system by using a IoT gateway, it can send the kwh data of different time duration which was with the label of spike/peak/flat/valley kwh to the billing system for calculating the electricity bill of different time duration in a day.

For example, the electricity price of spike kwh is 5 USD/1 kwh, and time duration of from 9:00 am to 11:30 am was labeled as spike kwh.
Then, if energy meter record 3 kwh used in total during 9:00 am to 11:30 am, it will send the data of 3 kwh with the label of spike kwh to the billing system, and the system calculate the electricity cost of 3x5=15USD in total from 9:00 am to 11:30 am.

Other Question? Please contact us and we will get back to you as soon as possible.