6 Circuit DC Energy Power Meter for Base Transceiver Station

• Display: Digital
• Installation: Direct Connected
• Usage: Multi-Functional Energy Meter, Meter for Industry and Home Use, Standard Electric Energy Meter, Reactive Energy Meter, Maximum Demand Meter
• Electric Equipment: DC Energy Meter
• Theory: Electronic Meter
• Power Meter Connection: Terminal
• Model NO.: AMC16Z-DETT
• Measured Signal: Continuous Wave
• Type: Energy Meter
• Certification: IEC
• Customized: Non-Customized
• DC Voltage: -48VDC
• DC Current: 6 Channel DC200A/5V
• Grid Power Monitoring: 1 Channel 0-5V DC
• Communication: Modbus RTU RS485
• Application: Telecommunication Base Station
• Transport Package: Paper Cartpn
• Specification: 134*246mm
• Trademark: ACREL
• Origin: Jiangsu, China
• HS Code: 9030849000
• Production Capacity: 1000PCS/Week

Product Description

Product Description

6 channel / 6 circuit dc energy power meter for telecom base transceiver station AMC16-DETT

AMC16-DETT is designed special for China tower metering,ACREL 6 circuit dc power meter is for China Telecom, China Mobile, China Unicom,and other telecommunication tower metering.
Base station dedicated DC energy meter AMC16-DETT is specially designed for base stations where have sharing requirements, and switch power supply is without the function of sub-user metering.

The meter could measure 6 circuits DC energy, and supply working current to the matched hall sensors. Meanwhile, it can realize zero drift calibration by upper computer software. have the functions of telemetering,teleindication,teleadjusting, metering at real time, energy quality abnormal alarm, data storage and processing, data interaction.

This meter can measure DC power consumption of three operators, providing detail datas for base station.

Functions and Parameters
 

Functions of AMC16-DETT dc energy meter

*DC rated voltage:1 circuit -48VDC
 

*DC current :6 channel hall current sensor,total DC200A/5V,China Telecom, China Mobile, China Unicom and the 1st channel reserve 50A/5V, 2nd channel reserve 100A/5V.
 

*Communication: RS485,default baud rate:9600bps
 

*Main functions:Monitoring equipment system time, total voltage,
output current, power and energy, each circuit voltage, current,power and energy,LED display
 

*Alarm function:DC low voltage output alarm,DC high voltage output alarm,one power down alarm, module voltage loss alarm, metering branch error alarm, internal program error alarm, clock error alarm, memory failure alarm and AC input power failure alarm
 

*Timing function:support broadcast timing, could remote timing to the meter by RS485

*Lightening protection(SPD module)
 

*Clamps power supply:Power supply output:+12V/100Ma, -12V/50mA
 

*Power supply for the meter:-40~-60VDC

 

Input	DC voltage	1 channel: -48VDC
	DC current	6 channel hall current sensor,total DC200A/5V,China Telecom, China Mobile, China Unicom and the 1st channel reserve 50A/5V, 2nd channel reserve 100A/5V.
	Grid power monitoring	1 channel: 0-5VDC
	Overload capacity	Voltage:1.2times continued,2 times continued 1s; Current: 1.2 times continued,10 times continued 1s.
Accuracy (superposition hall sensors)		1%In≤I≤10%In error±2.5%; I>10%In error±2%
resolution		Voltage output accuracy 0.01V; current output accuracy 0.01A; power output accuracy 0.01kw; energy output accuracy 0.01kwh
Functions	Basic function	Monitor device system time, total voltage, output total current, power, energy, each channel voltage, current, power, energy; LED indicator display;485 communication
	Metering function	Start current: under rated voltage, when the load current value of the meter doesn't exceed 1% of the max. current, the meter starts. Shunt running current: when there is no current in the current circuit of the meter, and 85%-125%of the rated voltage is applied on the voltage circuit, the calculator shall not have more than
	Alarm function	DC low voltage output alarm,DC high voltage output alarm,one power down alarm, module voltage loss alarm, metering branch error alarm, internal program error alarm, clock error alarm, memory failure alarm and AC input power failure alarm
	Timing function	support broadcast timing, could remote timing to the meter by RS485
	Hall CT power supply	:Power supply output:+12V/100Ma, -12V/50mA
	Clock accuracy	≤0.5s/d(23ºC),≤1s/d(-20ºC~60ºC)
Powe supply for ther meter		-40VDC~ -60VDC
Power consumption		≤2W

Dimensions and Wirings


ACREL recommended Hall CTs (Unit:mm) AHKC-EKA,AHKC-EKB or AHKC-K

About ACREL