Acrel Ascb1-M-4G Metering Smart Circuit Breaker Gateway with Automatic Remote Control Protection for Smart Factory with 4G

• Customization: Available
• Application: Position Sensor
• Type: Current Transformer
• Model NO.: ASCB1-M-4G
• Phase: Single
• Operation Condition: Indoor
• Usage: Measurement
• Winding Form: Single Layer & Tightly Wound Type
• Insulating Medium: Epoxy Resin
• Installation: DIN Rail
• Magnetic Circuit Structure: Combined Type
• Voltage Transformation Principle: Photoelectric Type
• Power Supply: AC 220V
• Consumption: Less Than 30W
• Communication: Ethernet
• Display: LCD DOT-Matrix
• Incident Record: up to 20 Alarm, Fault and Action Records Each
• Protocol: Modbus/Mqtt and So on
• Elevation Requirements: 2000m
• Ambient Temperature: -10-55/24h Average Temperature Not Higher Than 40
• Storage Temperature: -20--70 Degree
• Levels of Protection: IP20
• Way to Installation: Standard 35mm Guide Rail Installation
• Transport Package: Carton
• Specification: 60*78*36mm
• Trademark: Acrel
• Origin: Jiangsu, China
• HS Code: 7201100000
• Production Capacity: 5000

Product Description

 

Product Description

ASCB1 series intelligent micro circuit breakers (hereinafter referred to as intelligent micro circuit breakers) are applied to low-voltage terminal distribution networks in industrial, commercial, civil buildings and infrastructure fields in residential buildings and similar places.The intelligent micro circuit breaker is used with the intelligent gateway to conduct real-time monitoring of the key electrical parameters of the power line, such as voltage, current, power, temperature, leakage, energy consumption, etc., and has remote control, abnormal warning, accident trip warning alarm, electric energy metering statistics, fault positioning and other functions.
This series of products can be selected from unipole, 2 pole, 3 pole, 4 pole.

Detailed Photos

1. The device is suitable for standard 35mm rail type installation. When installing, just clip the device into the rail and fix it with a buckle .
2. According to the actual power distribution management and line laying design requirements, select and use IoT modules and electrical boxes that meet the needs.
3. The specifications of the box are assembled and installed in the order of the modules shown in the figure, and each module is   connected by a special 8PIN data cable made by the manufacturer.

4) The circuit breaker should be installed vertically. When the handle is in "/OFF", the contacts are disconnected. When the handle moves upward, the contacts move in the closing direction.

Product Model	ASCB1-M-4G	ASCB1-M-CE
Power Supply	AC 220V
Consumption	≤30W
Communication	4G	Ethernet
Display	LCD dot-matrix
Incident Record	Up to 20 alarm, fault and action records each
Protocol	Modbus,MQTT and so on
Elevation Requirements	2000m
Ambient Temperature	-10ºC-55ºC,24h the average temperature is not higher than 40ºC
Environmental Requirements	No explosion hazard, no conductive dust, no sufficient corrosion of metal and damaged insulation, no significant vibration
Relative Humidity	At + 40ºC, the relative humidity of the air is 50% and can have high relative humidity at lower temperatures
Storage Temperature	-20ºC-70ºC
Levels of Protection	IP20
Way to Installation	Standard 35mm guide rail installation

FAQ

 Q: Can the circuit breaker data be collected through RS485 communication?
A: The circuit breaker has its own RS485 communication interface, and it does not need to be equipped with an ASCB1-M gateway to access the customer system, but the customer needs to provide the circuit breaker with DC12V 12A auxiliary power supply

Q: How many circuit breakers can a gateway carry?
A: 16PCS

Q: How Gateways and Circuit Breakers are Networked?
A: The gateway and the circuit breaker are connected by a 4pin cable, a set of DC12V auxiliary power supply, and a set of RS485 communication lines.
The connection between the circuit breaker and the circuit breaker is the same.
One-key addressing operation through the gateway

Q: Does the circuit breaker need to be equipped with additional accessories?
A: 1. Internally integrate various sensor modules, including: current sensor, leakage transformer, temperature sensor, etc.;
2. The circuit breaker integrates the release function, which can realize remote opening and closing operations;
3. Configure the circuit breaker network cable

Certifications

 

Packaging & Shipping

 

Company Profile