Abat100-S-02 Monitor One 2V Battery for Lead-Acid Battery

• Type: Lead-Acid Batteries
• Usage: Car, Bus, UPS, Electric Power, Lighting, Electric Bicycle, Boat
• Nominal Voltage: 2V
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: ABAT100-S-02
• Discharge Rate: Low Discharge Rate
• Shape: Square Battery
• Electrolyte: Acid
• Installation: Open Frame
• Rechargeable: Non-Rechargeable
• Display: Real-Time Data Display, Graphs, Histogram Display
• Historical Data: Query and Export of Equipment Operation History, C
• Parameter Configuration: Provide Basic Information Management Functions
• Communication Protocol: Modbus-RTU
• Alarm Mode: Local Audible and Visual Alarm, Indicator Alarm, S
• Capacity Estimation: Group Batteries Soc, Soh Estimation; Single Batter
• Transport Package: Carton
• Trademark: Acrel
• Origin: China
• Package Size: 17.00cm * 15.00cm * 13.00cm
• Package Gross Weight: 0.500kg
• Lead Time: 1 days (1 - 100 Pieces) ; To be negotiated ( > 100 Pieces)

Product Description

1 Overview
Acrel ABAT100 series battery online monitoring system can provide battery operation information such as voltage, internal resistance and internal temperature, including SOC and SOH, and can provide early warning and battery equalization for failed batteries to guarantee battery pack backup time and extend battery pack life. The system has monitoring functions, and is easy to install, maintain and access. The system mainly consists of ABAT100-S single battery monitoring module, ABAT100-C group battery monitoring module, ABAT100-HS collector module and touch screen, etc. The alarm and real-time data can be queried and parameters can be set through the touch screen, and the monitoring platform can be selected to realize networked centralized management.

2 Product Module

Model	Function Description
ABAT100-HS	DC24V input, one to manage a group of batteries, up to 120 batteries in a group.
ABAT100-S-02	Monitor one 2V battery, monitor battery voltage, internal resistance and negative terminal temperature.
ABAT100-S-06	Monitor one 6V battery, monitor battery voltage, internal resistance and negative terminal temperature.
ABAT100-S-12	Monitor one 12V battery, monitoring battery voltage, internal resistance and negative terminal temperature.
ABAT100-C	Monitor one charge/discharge current with an ambient temperature with a maximum current range of 1000A.

3 Product Description
3.1 ABAT100-HS Collector Module 
Introduction
The ABAT100-HS collector module is used as a management module for a group of battery packs to read the battery monitoring data from the front-end single battery monitoring sub-module and analyze and process the data, which can estimate the remaining capacity of each battery and the whole group of batteries. The operation parameters can be set directly by matching with the touch screen, and the collected data can be viewed directly. The collector module will automatically save the key battery data periodically and can be sent to the third party monitoring system through RS485 port, supporting MODBUS protocol. One collector module manages one group of batteries, and the maximum number of manageable modules is 120.

Function	Description
Display	Real-time data display, graphs, histogram display
Historical Data	Query and export of equipment operation history, charging and discharging records and monitoring events
Parameter Configuration	Provide basic information management functions
Communication protocol	MODBUS-RTU
Alarm mode	Local audible and visual alarm, indicator alarm, SMS alarm, etc.
Capacity estimation	Group batteries SOC, SOH estimation; single battery SOC, SOH estimation
Regular inspection	Intelligent judgment of the current state and automatic issuance of test commands
Indicator light	Red and green LED lights, green light as the power light, red light as the indicator light

Technical parameters	Description
Working Environment	Operating temperature: -10ºC~50ºC Relative humidity: 5%~95% Atmospheric pressure intensity: 80~110kPa
Management Capability	One collector can monitor a maximum of total 120 batteries
Alarm Type	Group voltage overcharge/discharge, single voltage overcharge/discharge, current overcharge/discharge, high internal resistance of single unit, abnormal communication, etc.
Power Supply	DC24V
Protection	With overvoltage and short circuit protection
Communication Interface	With RS485 communication port, support MODBUS/RTU
Insulation withstand voltage	2000VAC
Installation method	Tie-down mounting or adhesive mounting
Weight	90g

3.2 ABAT100-S Single Battery Monitoring Module
Introduction
ABAT100-S single battery monitoring module (S module) can be embedded into existing monitoring system to achieve online monitoring of each backup battery voltage, internal resistance and negative battery temperature, in accordance with ANSI/TIA-942 standard requirements. The monitoring system controls and reads data by sending MODBUS commands to the S-module, and performs internal resistance testing, each S-module has a settable address. S-modules are extremely simple and easy to install and wire, and can be directly attached to the battery with detachable connecting wires, which does not affect the battery operation during construction.
 

Function	Description
Online monitoring	Online monitoring 24 hours a day, one battery per module, monitoring voltage, internal resistance and negative terminal temperature
High accuracy measurement	Internal resistance measurement error as low as 1%
Battery internal resistance test	Automatic periodic measurement of the internal resistance of each battery controlled by the collector
Low power design	Manual entry into low power mode, S-module draws current from the battery down to 0.5mA
Anti-jamming design	High anti-interference design, can block the ripple interference of high power high frequency UPS
Communication protocol	MODBUS-RTU protocol
Installation method	Tie-down mounting or adhesive mounting
Indicator light	Red and green LED lights, green light as the power light, red light as the indicator light

Technical parameters	Description
Working Environment	Operating temperature: -10ºC~50ºC Relative humidity: 5%~95% Atmospheric pressure intensity: 80~110kPa
Monitoring Capability	One S-module monitors one battery
Monitoring Scope	2V, 6V, 12V battery with capacity less than 3000AH
Measurement range and accuracy	Measurement content	Scope	Accuracy
	Single Voltage	2V, 6V, 12V	±0.1%
	Single internal resistance	50~65535uΩ	(Resolution) 1uΩ
	Negative temperature	-5ºC~+105ºC	±1°C
Power requirements	Directly from the monitored battery, 2V module normal operation of the absorption current of 10mA, the maximum is not more than 13mA, 6V, 12V module normal operation of the absorption current of 5mA, the maximum is not more than 7mA, different modules absorption current consistency is very high
Protection	Measuring circuit and power circuit with two levels of protection, with reverse connection protection and opto-isolation
Communication Interface	UART port, support MODBUS protocol
Insulation withstand voltage	2000VAC
Weight	90g

3.3 ABAT100-C Module 
Introduction
The ABAT100-C battery monitoring module (C module) can be embedded into existing monitoring systems for online monitoring of battery charge and discharge current and ambient temperature. The monitoring system controls and reads data by sending MODBUS commands to the C-module, and each C-module has a settable address. the C-module is extremely simple and easy to install and wire, and can be directly attached to the battery with removable connection cable, which does not affect the battery operation during construction.
 

Function	Description
High stability	Reliable and stable long-term operation
Anti-jamming design	High anti-interference design, can block the ripple interference of high power high frequency UPS
Communication protocol	MODBUS-RTU Protocol
Installation method	Tie-down mounting or adhesive mounting
Indicator light	Red and green LED lights, green light as the power light, red light as the indicator light.

Technical parameters	Description
Working Environment	Operating temperature: -10ºC~50ºC Relative humidity: 5%~95% Atmospheric pressure intensity: 80~110kPa
Monitoring Capability	One C-module monitors the charge and discharge current of a group of batteries against the ambient temperature
Monitoring Scope	2V, 6V, 12V battery pack
Measurement range and accuracy	Measurement content	Scope	Accuracy
	Charging and discharging current	0~1000A	±1%
	Ambient temperature	-5ºC~+105ºC	±1°C
Power requirements	DC24V, 1W
Protection	Measurement circuit and power circuit with two levels of protection
Communication Interface	UART port, support MODBUS protocol
Insulation withstand voltage	2000VAC
Weight	90g