| Customization: | Available |
|---|---|
| After-sales Service: | 24h Online |
| Warranty: | 2 Years |
|
Still deciding? Get samples of US$ 220.5/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Note:1,When the meter is connected by 5A/1.25mA as the two-time mutual inductance method, the meter's own secondary-side transformer should be kept at a distance from the on-site primary-side transformer to avoid out-of-line interference.
| Measured parameters |
Total electrical measurement |
| Four-quadrant energy,Split phase electricity,Apparent energy,Multi-rate energy | |
| Pulse output of energy | Total active ,Total reactive energy pulse output (72 type only has active energy pulses) |
| Demand | Three-phase current, active power, reactive power, real-time demand of apparent power, and maximum demand (including time stamp) |
| Extreme value statistics |
Current, line voltage, phase voltage, active power, reactive power and other electrical parameters extreme values of this month and last month (including time stamps) |
| Power quality | Unbalance of current, line voltage, phase voltage |
| Voltage phase angle, current phase angle | |
| Total (odd, even) harmonic content of voltage and current | |
| Harmonic content of voltage and current (2-63 times) | |
| Interharmonic (included with option S). | |
| Flicker (included with S option). | |
| Voltage peak coefficient | |
| Telephone waveform factor | |
| Current K-factor | |
| Vector | |
| Voltage and current waveform | |
| Fundamental voltage and current | |
| Fault waveform recording | Record of voltage ramp-up and drop interruptions, inrush currents, etc. (included with S option). |
| Event logging | DIDO records, which can record the last 128 DID records |
| Alarm logging | The last 128 alarm records can be recorded |
| Communication | Modbus - RTU protocol, DL/T 645-2007 statute |
| Switching value | 72 Shape: 2 channels of switching input + 2 channels of switching output; 96 Shape: 4 switching inputs + 2 switching outputs |
| Base model | Basic function | Optional function | Option Group |
| APM510 | 2DI2DO1EP1C | 1. CE (Ethernet Communication/MODBUS-TCP). | 1+5+6+7+8 2+3+4+7+8 5+6+7+8+9 5+6+7+8+10 5+6+7+8+11 5+6+7+8+12 |
| 2.2C (Extended 2nd Communication). | |||
| 3.K (2 switch inputs + 2 switch outputs). | |||
| 4.2M (2ch analog). | |||
| 5.T (4-channel NTC temperature measurement). | |||
| 6.L (1 channel leakage). | |||
| 7.F (Compound Rate). | |||
| 8.S (0.2S level + fault recording). | |||
| 9.WF(WiFi Communication) | |||
| 10.LR(Lora Communication) | |||
| 11.4G(4G Communication) | |||
| 12.NB(NB Communication) |
| Display | Display method | Dot matrix liquid crystal; Switch between Chinese and English | ||
| Resolution | 128*128; | |||
| Backlight | White LED; | |||
| Visible area | 72 Shape: 38mm*46mm (1.78"/2.3"); 96 Shape: 56mm*60mm (2.46"/3.2"); |
|||
| Signal | Electrical network | Three-phase three-wire, three-phase four-wire, see the wiring diagram; | ||
| Frequency | 45~65Hz; | |||
| Voltage | Rating: AC 3*57.7/100V, AC 3*63.5/110V, AC 3*230/400V, AC 3*400/690V (96 Shape only); | |||
| Overload: 1.2 times the rating (continuous); 2x rating/1 second; | ||||
| Power consumption: < 0.5VA(Every way); | ||||
| Current | Ratings: AC 3x 1 (1.2) A, AC 3x5(6)A; | |||
| Overload: 1.2 times the rating (continuous); 10x rating/1 second; | ||||
| Power consumption: < 0.5VA(Every way); | ||||
| Measurement accuracy | Voltage, current | IEC 61557-12 0.2% | ||
| Voltage harmonics, current harmonics | IEC 61557-12 1% | |||
| Frequency | IEC 61557-12 ±0.02Hz | |||
| Active power | IEC 61557-12 0.5% | |||
| Reactive power | IEC 61557-12 1% | |||
| Active electrical energy | 0.5S class GB/T 17215.321-2008 <=> C class GB/T 17215.321.2021 (0.2S accuracy when S is selected) 0.2S class GB/T 17215.321-2008 <=> D class GB/T 17215.321.2021 (1 accuracy when using the built-in secondary transformer of the instrument) 1class GB/T 17215.321-2008 <=> B class GB/T 17215.321.2021 |
|||
| Reactive power | IEC 62053-24 Class 1 | |||
| Power quality (only available when S is selected). | Waves recording | 20 waveforms, 10 waves before and after; | ||
| Waveform capture | 128 cycle points are stored per waveform; | |||
| Switch input | Dry contact input, built-in power supply; Response time: less than 300ms |
|||
| Relay output | Contact type: normally open contact; Contact capacity: AC 250V/3A DC 30V/3A; |
|||
| Energy pulse output | Output mode: photocoupler pulse with open collector; Pulse constant: 10000imp/kWh (default); |
|||
| communication | RS485 interface/Modbus-RTU protocol and DLT645 protocol; RJ45 interface (Ethernet)/Modbus-TCP protocol; Wireless interface |
|||
| power supply | Working range: AC 85V~265V; DC100V~350V Power consumption: power consumption≤15VA; |
|||
| Safety | Power frequency withstand voltage | The power frequency withstand voltage between the housing and the auxiliary power supply, each input and output terminal group is AC 4kV/1min; The power frequency withstand voltage between the auxiliary power supply and each input terminal and each output terminal group is AC 2kV/1min; The power frequency withstand voltage between the voltage input and other input and output terminal blocks is AC 2kV/1min; The power frequency withstand voltage between the current input and other input and output terminal blocks is AC 2kV/1min; The power frequency withstand voltage between the relay output and other input and output terminal blocks is AC 2kV/1min; The power frequency withstand voltage between the terminal groups of switching input, communication, analog output and pulse output is AC 1kV/1min; |
||
| Insulation resistance | Inputs,outputs to the shell>100MΩ; | |||
| Electromagnetic compatibility | Complies with IEC 61000 standard (Level 4); | |||
| Environment | Operating temperature:-25ºC~+70ºC;Storage temperature:-40ºC~+85ºC; Relative humidity:≤95% without condensation;Altitude:≤2500m; |
|||
| Protection Level | Display panel IP54; (Optionally IP65). | |||
| Standards | IEC 60068-2-1 IEC 60068-2-2 IEC 60068-2-30 |
Environmental Testing-Part 2-1:Tests Test A:Cold IDA Environmental Testing Part 2-2:Tests Test B:Dry heat Environmental Testing Part 2-30:Tests Test Db:Damp heat,cyclic (12+12h) |
||
| IEC 61000-4 | Electromagnetic compatibility-Testing and measurement techniques | |||
| IEC 61557-12 | Electrical safety in low voltage distribution systems up to 1 000V a.c. and 1 500V d.c -Equipment for testing, measuring or monitoring of protective measures - Part12:Performances measuring and monitoring devices(PMD) | |||
| IEC 62053-22 | Electricity metering equipment (a.c.)-Particular requirements - Part22:Static meter for active energy(class 0.2S and 0.5S) | |||
| IEC 62053-24 | Electricity metering equipment (a.c.)-Particular requirements - Part24:Static meter for reactive energy at fundamental frequency (classes 0.5S 1S and 1) | |||
){kind=link}