Installation Type: | Open Snap Type |
---|---|
Sensing Type: | CT-Powered |
Contact: | Contactless |
Output Signal Type: | Digital Type |
Production Process: | Normal Wirewound |
Material: | Ceramics |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
Items | Features | |
Range | Temperature | -50ºC~125ºC |
Current | 1~400A,AC | |
Precision | Temperature | ±1ºC |
Current | 1%FS | |
Resolution | Temperature | 0.1ºC |
Current | 0.01A | |
Sampling & Transmission cycle | CT-powered:10~30S;Battery:3min | |
CT-powered, starting current | ≥2.5A,AC | |
Battery life | 3 years(25ºC), Replaceable(CR2450) | |
Wireless frequency | 470Mhz/433Mhz | |
Communication distance | 150m in open area | |
Environment | -40~+85ºC;≤95% RH | |
Installation | Open snap type | |
Cable diameter | 6~29mm |
The ACE100 wireless temperature & current sensor is installed in an open snap type. During installation, the sensor shall be tightly attached to the cable to be tested, and the CT snap shall be fully fastened. When the cable current is less than the starting current of the sensor, the sensor uses the internal battery to work. If the current is greater than the starting current of the sensor, the sensor will sense the power to save battery power.
The wireless temperature coordinator ATC600 used with ACE100 wireless temperature & current sensor can be installed by guide rail (DIN35mm).
Suppliers with verified business licenses